Heat Pump Technical Assessment Ireland: What It Is and Why You Need One
The SEAI technical assessment is a critical step for Irish homeowners whose homes have a BER rating below B2. It unlocks the €6,500 heat pump grant and ensures your system is correctly designed. Here is everything you need to know about the process and the €200 grant.
By Smart Solar Editorial · Updated 15 May 2026 · 7 min read

For many Irish homeowners with older homes, the SEAI heat pump technical assessment is the key that unlocks the €6,500 heat pump grant. Without a BER of B2 or better, this assessment is the alternative pathway that allows you to install a heat pump with full grant support even in a home that has not yet been fully retrofitted.
This guide explains exactly what the technical assessment involves, who needs one, how the €200 grant works, and what to expect from the process.
What Is the Heat Pump Technical Assessment?
The SEAI heat pump technical assessment is a professional engineering survey carried out by an SEAI-registered technical assessor. Its purpose is to determine whether a proposed heat pump installation in a specific home can achieve an in-situ SCOP (Seasonal Coefficient of Performance) of at least 2.5.
SCOP 2.5 is the minimum efficiency threshold SEAI has set for grant-eligible heat pump installations. It means the heat pump must deliver at least 2.5 units of heat for every unit of electricity consumed, averaged across the heating season. In practice, well-designed systems achieve SCOP 3.0–4.5, but SEAI's 2.5 threshold ensures that grant money is not used on systems that would barely outperform direct electric heating.
The assessment is not simply a BER calculation. It is a full system design exercise that looks at:
- The home's actual heat demand — calculated from the building's construction, area, insulation levels, window specifications, and air tightness
- The proposed heating system — heat pump model, size, flow temperature, and heat emitter (radiator or UFH) specifications
- The system's predicted SCOP — calculated using the EN 14825 methodology for Irish climate conditions
- Any prerequisite works — minimum insulation or radiator upgrades needed to achieve SCOP 2.5+
If the assessment confirms SCOP 2.5+ is achievable, the assessor issues a Technical Assessment Report that SEAI accepts as an alternative to the B2 BER requirement.
Who Needs a Technical Assessment?
The technical assessment is required if your home's BER is below B2 (i.e., B3, C, D, or E rated).
Homes with BER B2 or better can apply directly for the €6,500 heat pump grant without an assessment. These are typically:
- Homes built since 2006 with adequate insulation
- Older homes that have had significant insulation upgrades (attic, walls, windows)
- Homes that received BER upgrades through previous SEAI grant work
The majority of Ireland's pre-1990 housing stock has BER ratings below B2, meaning the technical assessment route is essential for these homes.
A rough guide to BER ratings and assessment need:
| Home Type | Typical BER | Assessment Needed? |
|---|---|---|
| New build (post-2021) | A1–A2 | No (not grant-eligible anyway) |
| Well-retrofitted older home | B1–B2 | No |
| 2000s home with some insulation | B2–B3 | B3 needs assessment |
| 1990s standard construction | C1–C2 | Yes |
| 1970s–1980s home | C1–D1 | Yes |
| Pre-1970 home | D1–E | Yes |
The Technical Assessment Grant: How the €200 Works
SEAI provides a grant of €200 specifically for the technical assessment cost. The grant covers the full typical assessment fee. Here is how it works:
- You register on the SEAI portal and submit an application for both the heat pump grant and the technical assessment grant
- You hire an SEAI-registered technical assessor (separately from your installer — they should be independent)
- The assessor visits your home and completes the assessment
- You pay the assessor the assessment fee (typically €150–€250)
- SEAI reimburses you the €200 grant after the assessment report is submitted and verified
In most cases, the assessment is effectively free — the grant covers the full cost. In some cases where assessors charge more than €200, you pay a small top-up.
What Happens During the Assessment Visit?
The technical assessment visit typically takes 1–2 hours and involves:
Building survey:
- Measuring all room dimensions
- Identifying wall construction type (solid, cavity, cavity with insulation)
- Assessing insulation levels (attic, floor)
- Measuring window areas and types
- Noting air tightness features
Heating system survey:
- Measuring each radiator's dimensions and output
- Checking pipe sizes and circuit configuration
- Reviewing the existing hot water cylinder
- Confirming available space for the new heat pump unit and cylinder
System design:
- Calculating design heat load for each room
- Proposing a heat pump model and output capacity
- Calculating the flow temperature required given existing radiators (or proposed upgrades)
- Running the SCOP calculation for the proposed system
Identifying minimum prerequisite works: If the home cannot achieve SCOP 2.5 with the current structure and radiators, the assessor will identify the minimum works needed — this might be attic insulation, radiator upgrades in specific rooms, or draught-proofing.
The Technical Assessment Report
After the visit, the assessor produces a Technical Assessment Report containing:
- Summary of the building survey data
- Heat loss calculation by room and total design heat load
- Specification of the proposed heat pump installation (brand, model, output)
- Flow temperature design and radiator output verification
- SCOP calculation confirming 2.5+ (or explaining why it cannot be achieved)
- List of any prerequisite works
This report is submitted to SEAI as part of your heat pump grant application. If the report confirms SCOP 2.5+, your grant application can proceed.
Choosing a Technical Assessor
Your technical assessor must be registered on the SEAI National Register of Technical Assessors for heat pumps. Key points:
- The assessor should be independent from your installer to avoid conflicts of interest
- Your installer may recommend assessors they work with regularly — this is acceptable but ensure you can verify the assessor is on the SEAI register
- Some companies offer combined technical assessment and installation services — ensure the assessment report clearly demonstrates SCOP compliance rather than simply endorsing a preferred product
- Assessors typically charge €150–€250 for a residential assessment
What If the Assessment Says SCOP 2.5 Cannot Be Achieved?
If the assessor determines that SCOP 2.5 cannot be achieved with the proposed installation (usually because the home is too leaky or the radiators are too undersized), they will typically specify what remediation works would be needed to make it viable:
- Attic insulation top-up: Often the minimum required; cheap and SEAI-grant-eligible
- Cavity wall insulation: For 1970s+ homes with unfilled cavities
- Radiator upgrades: In specific rooms where the existing radiator is significantly undersized
- Draught-proofing: Chimney balloons, skirting sealing, letterbox sealing
Once these works are carried out, the assessor can either update the report or a new assessment can confirm SCOP 2.5+ eligibility.
The assessor cannot simply pass a home that cannot meet the standard — falsifying the report is a matter of professional liability and SEAI enforcement.
Timeline from Assessment to Installation
| Step | Typical Duration |
|---|---|
| Submit SEAI application (with technical assessment) | Same day online |
| Book assessor | 1–2 weeks wait |
| Assessment visit | 1 day |
| Assessment report issued | 1–2 weeks |
| SEAI review and grant approval | 2–4 weeks |
| Choose installer and sign contract | 1–2 weeks |
| Installation | 2–4 days |
| Post-installation survey | 1–2 weeks |
| Grant payment to installer | 4–6 weeks |
Total timeline from starting the process to installation completion is typically 10–18 weeks for the technical assessment route. Plan accordingly, especially if you want to complete installation before the next heating season.
Get 3 free heat pump quotes — free and no obligation.
Frequently asked questions
Do I need a technical assessment for the SEAI heat pump grant?
Only if your BER rating is below B2. Homes with BER B2 or better can apply directly for the €6,500 grant without a technical assessment. For homes below B2 — the majority of Ireland's older housing stock — the technical assessment is the alternative pathway to grant eligibility.
How much does the SEAI technical assessment cost?
Technical assessors typically charge €150–€250 for a residential heat pump assessment. SEAI provides a €200 grant to cover this cost, meaning the assessment is often free or very low cost to the homeowner.
Can my heat pump installer carry out the technical assessment?
In theory, an installer who is also a registered technical assessor can carry out both roles, but this creates a potential conflict of interest. For objectivity, it is best to use an independent assessor. SEAI accepts reports from both, but recommends independence.
What happens if my home fails the technical assessment?
The assessor will identify what works are needed to achieve SCOP 2.5+. These are typically minor — attic insulation, cavity wall insulation, or a few radiator upgrades. Carry out the works and the assessment can be updated or a new assessment confirming compliance can be submitted.
How long is a technical assessment valid?
The technical assessment report is specific to the proposed installation. If you change the heat pump model, significantly alter the planned radiator specification, or carry out major insulation works after the assessment, the report should be updated. SEAI may request a new assessment if the proposed installation changes significantly from what was assessed.
Sources & further reading
- SEAI Technical Assessment for Heat Pumps — Sustainable Energy Authority of Ireland
- SEAI Heat Pump Grant Eligibility — Sustainable Energy Authority of Ireland