SEAI Heat Pump Grant 2026: How to Apply, Eligibility and What You Get
The SEAI heat pump grant of €6,500 is available to Irish homeowners in 2026 and makes heat pump installation significantly more affordable. This guide explains exactly who qualifies, how to apply, and what the process involves from start to finish.
By Smart Solar Editorial · Updated 15 May 2026 · 8 min read

The SEAI heat pump grant is Ireland's most valuable home energy grant in 2026, providing €6,500 towards the cost of an air-to-water heat pump installation. Administered by the Sustainable Energy Authority of Ireland, the grant is part of Ireland's National Retrofit Plan and Climate Action Fund, targeting the replacement of oil and gas boilers with low-carbon heat pumps across the existing housing stock.
In 2026, with heat pump installation costs ranging from €15,000 to €22,000, the €6,500 grant represents a meaningful contribution — reducing the net cost to €8,500–€15,500 for most homes. This guide explains everything you need to know about accessing the grant.
Grant Amounts in 2026
| Grant Type | Amount |
|---|---|
| Air-to-water heat pump | €6,500 |
| Technical assessment (pre-installation) | €200 |
The technical assessment grant of €200 is available to homeowners who need an assessment to confirm their home can achieve SCOP 2.5+ — this is the route for homes with BER ratings below B2.
Note: Ground source heat pumps also qualify for the €6,500 grant. Air-to-air heat pumps do not qualify.
Who Is Eligible for the SEAI Heat Pump Grant?
To qualify for the SEAI heat pump grant in 2026, you must meet all of the following criteria:
1. Home age: Your home must have been built and occupied before 2011. Homes built after 2011 are generally expected to meet energy efficiency requirements without grant support.
2. Home type: The grant applies to private residential dwellings — houses and apartments. Commercial properties, holiday homes, and new builds do not qualify.
3. BER requirement (one of two options):
- Option A: Your home has a BER (Building Energy Rating) of B2 or better
- Option B: Your home has a technical assessment completed by an SEAI-registered assessor confirming the installation can achieve an in-situ SCOP of at least 2.5 with the proposed system
Option B allows homes with BER C, D, or E ratings to qualify, provided the system is correctly designed. This is the route for many Irish pre-1990s homes.
4. SEAI-registered contractor: The installation must be carried out by a contractor listed on the SEAI National Register of Heat Pump Contractors. You can search this register at seai.ie/grants.
5. Application timing: You must apply for the grant before work begins. Retrospective grant applications are not accepted.
6. No previous heat pump grant: The grant applies once per property. If a previous owner installed a heat pump with SEAI support, the grant cannot be claimed again for the same property.
7. Personal responsibility: You must own and live in the home (or be the landlord of a private rented property, though different terms apply for landlords).
Step-by-Step: How to Apply for the SEAI Heat Pump Grant
Step 1 — Check eligibility: Look up your BER certificate at ndber.seai.ie (every home sold or rented since 2007 must have a BER). If your BER is B2 or better, you can proceed directly. If below B2, you will need the technical assessment route (Step 2A).
Step 2 — Register on the SEAI portal: Create an account at seai.ie/grants/home-energy-grants/heat-pump-grant/ and complete the online application form. You will need your MPRN (Meter Point Reference Number — found on your electricity bill or ESB Networks correspondence).
Step 2A (if BER below B2) — Commission a technical assessment: Hire an SEAI-registered technical assessor (search at seai.ie/grants). The assessor visits your home, measures heat loss, designs the proposed heating system, and issues a Technical Assessment Report confirming SCOP 2.5+ eligibility. Cost: €200 (reimbursed by the grant).
Step 3 — Choose a contractor: Select a contractor from the SEAI National Register of Heat Pump Contractors. Get at least three quotes. The contractor will confirm the system specification, provide a contract, and assist with SEAI paperwork.
Step 4 — Receive grant approval: SEAI reviews your application and issues approval. Do not begin works until approval is received.
Step 5 — Installation: Your registered contractor carries out the installation. This typically takes 2–4 days for a standard retrofit.
Step 6 — Post-installation survey: SEAI (or their representatives) conducts a post-installation survey to verify the works meet the grant conditions. This is typically arranged by your contractor.
Step 7 — Grant payment: SEAI pays the grant amount directly to your contractor, who deducts it from your final invoice. You pay only the balance.
Technical Assessment: The Route for Older Irish Homes
The technical assessment is a critical pathway for the hundreds of thousands of Irish homes with BER ratings below B2. Here is what it involves:
What the assessor does:
- Measures the floor area, window area, and construction type of your home
- Calculates the design heat load (to EN 12831)
- Reviews the existing heating circuit (radiator sizes, pipe sizes)
- Designs the proposed heat pump installation (unit size, flow temperature, radiator requirements)
- Runs a calculation confirming whether SCOP 2.5+ can be achieved with the proposed system
- Identifies any minimum works required (e.g., attic insulation top-up, radiator upgrades)
What the report contains:
- Heat loss calculation summary
- Proposed heat pump specification and SCOP prediction
- List of any prerequisite works
- Statement of compliance with SEAI minimum standards
Cost: €200, fully covered by the SEAI technical assessment grant (paid after the survey).
Finding an assessor: Search the SEAI National Register at seai.ie or ask your chosen installer to recommend one. Note that the assessor should be independent of the installer for objectivity.
One Stop Shop: A Simpler Route for Comprehensive Retrofits
If your home needs both insulation upgrades and a heat pump, consider using SEAI's One Stop Shop programme. One Stop Shop providers are approved by SEAI to manage complete retrofit projects, including:
- Energy assessment and retrofit plan
- Insulation works (attic, wall, floor, windows)
- Heat pump installation
- All grant applications managed on your behalf
- Single point of contact and responsibility
You pay one net price after all applicable grants. This simplifies the process but may slightly limit your choice of heat pump brand and installer.
Combining the Heat Pump Grant with Other SEAI Grants
The heat pump grant can be combined with other SEAI home energy grants to fund a comprehensive retrofit:
| Grant | Maximum Amount |
|---|---|
| Attic insulation | €1,500 |
| Cavity wall insulation | €1,700 |
| External wall insulation | €8,000 (detached) |
| Internal wall insulation | €4,500 |
| Window and door replacement | €4,500 |
| Heating controls | €700 |
| Combined with heat pump: potential total grants | Up to €23,400 |
Common Reasons Grant Applications Are Rejected
- Application submitted after work has already started
- Contractor not on the SEAI National Register
- Technical assessment not in place for below-B2 homes
- Home built after 2011
- Property is a commercial or holiday home
Always check the SEAI website for current grant terms — amounts and eligibility criteria are subject to change in each Budget.
Get 3 free heat pump quotes — free and no obligation.
Frequently asked questions
What is the SEAI heat pump grant amount in 2026?
The SEAI heat pump grant in 2026 is €6,500 for an air-to-water heat pump installation, plus €200 for a technical assessment if your BER is below B2. Ground source heat pumps also qualify for €6,500. Air-to-air heat pumps do not qualify.
Do I need a BER B2 rating to get the heat pump grant?
Not necessarily. You can qualify either by having a BER of B2 or better, OR by having a technical assessment confirming that the proposed installation can achieve SCOP 2.5+. The technical assessment route is available to homes with any BER rating, provided the system can be designed to meet the SCOP threshold.
Can I apply for the SEAI grant after my heat pump has been installed?
No. You must apply for and receive approval before work begins. Retrospective applications are not accepted. Always register and get approval first.
How long does the SEAI heat pump grant application take?
The initial application and approval typically takes 2–4 weeks. The post-installation survey and grant payment can take a further 4–8 weeks after the work is complete. Your contractor will typically factor this into the project timeline.
What is an MPRN and where do I find it?
MPRN stands for Meter Point Reference Number — a unique number identifying your electricity connection to the national grid. You can find it on any electricity bill from Electric Ireland, Energia, Bord Gáis, or SSE Airtricity, or by searching on the ESB Networks website.
Sources & further reading
- SEAI Heat Pump Grant — Eligibility and How to Apply — Sustainable Energy Authority of Ireland
- SEAI National Register of Heat Pump Contractors — Sustainable Energy Authority of Ireland
- SEAI Technical Assessment for Heat Pumps — Sustainable Energy Authority of Ireland