Cost of Heat Pump in Ireland 2026: Full Price Breakdown and What Affects It

The total cost of a heat pump installation in Ireland in 2026 ranges from €15,000 to €22,000 before SEAI grants, with the €6,500 grant reducing this to €8,500–€15,500 for most homes. Here is a complete breakdown of every cost element.

By Smart Solar Editorial · Updated 15 May 2026 · 9 min read

Heat pump installer connecting outdoor unit on an Irish home with tools and materials visible

Understanding the cost of a heat pump in Ireland in 2026 requires looking beyond the headline equipment price. A complete heat pump installation involves the outdoor unit, indoor components, hot water cylinder, controls, electrical works, commissioning, and often associated upgrades like radiator replacements. This guide breaks down every element so you can evaluate quotes accurately and plan your budget.

Overview: What Does a Heat Pump Installation Cost?

For a standard air-to-water heat pump installation in a 4-bed Irish semi-detached home:

Cost CategoryTypical Range
Heat pump unit (equipment only)€3,500–€6,500
Indoor hydraulic module€800–€1,500
Hot water cylinder (200–250 litre)€900–€1,600
Controls and thermostat€400–€900
Installation labour (2–4 days)€3,000–€5,000
Electrical works€500–€1,200
Commissioning and registration€300–€600
Total before ancillary works€9,400–€17,300

Additional costs common in Irish retrofits:

Ancillary ItemTypical Range
Radiator upgrades (per room)€250–€450 each
Underfloor heating (existing slab)€3,000–€8,000
Buffer tank€400–€800
SEAI technical assessment€200 (grant-eligible)
Typical total installed (no ancillary)€15,000–€22,000

After the SEAI heat pump grant of €6,500, the net cost for most homes is €8,500–€15,500.

Equipment Cost: Heat Pump Unit

The outdoor heat pump unit is the most expensive single component. Prices vary by brand, output capacity, and refrigerant type:

Brand and ModelOutputEquipment Price (excl VAT)
Daikin Altherma 3 R6–16 kW€2,800–€5,500
Daikin Altherma 3 H HT8–16 kW€3,500–€6,500
Mitsubishi Ecodan Ultraquiet5–11.2 kW€2,500–€4,500
Samsung EHS Mono HQ6–16 kW€2,200–€4,000
Grant Aerona⁴ R2906–13 kW€2,800–€4,500
Joule Cyclone Aire6–12 kW€3,500–€6,000 (includes cylinder)
Panasonic Aquarea T-Cap5–16 kW€2,500–€4,800

Note that installers typically purchase equipment at trade prices (15–30% below retail) and pass some of this margin through in their installation packages.

Indoor Components

Hydraulic module / Indoor unit: The indoor component manages the heat transfer between the refrigerant circuit and the home's heating water circuit. It typically includes a circulation pump, expansion vessel, safety valve, and integration for the hot water cylinder. Budget €800–€1,500 for the module alone.

Hot water cylinder: Most Irish homes need a new hot water cylinder when switching to a heat pump — the existing cylinder may be too small, poorly insulated, or lack a heat pump coil (twin coil). A 200-litre heat pump cylinder with twin coil costs €700–€1,200. Larger 250–300 litre cylinders cost €900–€1,500. Installation brings the total to €900–€1,600.

Buffer tank: Some systems (particularly older homes with small radiator systems or systems with multiple zones) benefit from a buffer tank (50–100 litres) that prevents rapid on/off cycling. Cost: €400–€800 including installation. Not always required with modern inverter heat pumps.

Labour Costs

Installation labour is a significant portion of the total cost. Irish heat pump contractors typically price based on the scope of work:

  • Straightforward installation (new build or recent retrofit, UFH, suitable space): €3,000–€4,500
  • Standard retrofit (existing radiator circuit, new cylinder): €4,000–€5,500
  • Complex retrofit (older home, multiple radiator upgrades, difficult access): €5,000–€7,500

Day rates for SEAI-registered heat pump installers in Ireland range from €350–€500 per person per day. A two-person team for 3 days represents €2,100–€3,000 in direct labour.

Electrical Works

A heat pump requires a dedicated electrical circuit — usually a 32-amp single-phase supply from the consumer unit. Depending on your existing setup:

  • Consumer unit already capable: €300–€600 for the new circuit
  • Consumer unit upgrade required: €600–€1,200
  • Three-phase supply for larger units (14–16 kW): €800–€2,000 depending on distance from grid

Your electrical contractor must be a Safe Electric registered electrician, and the work must be notified to ESB Networks.

Radiator Upgrade Costs

Many Irish retrofit homes need some radiator upgrades to allow the heat pump to run at lower flow temperatures (45–55°C rather than 70–80°C). Upgrading a single-panel to a double-panel convector radiator (which delivers roughly twice the heat output at the same flow temperature) costs:

  • Supply and fit per radiator: €250–€450
  • Typical number of upgrades (4-bed home): 3–6 radiators
  • Total radiator upgrade cost: €750–€2,700

This is one of the most impactful investments for improving system efficiency — worth budgeting for even if not included in the initial installer quote.

SEAI Grant Deductions

The following SEAI grants apply to heat pump projects in 2026:

GrantAmount
Air-to-water heat pump grant€6,500
Technical assessment€200

You must apply for these grants before the work begins (apply through SEAI.ie), and the work must be carried out by an SEAI National Register contractor. Grant payment is made directly to the contractor after completion inspection, reducing your final bill.

Additional SEAI grants for associated works (attic insulation, wall insulation, windows) can reduce the overall retrofit spend further.

Real Quotes from Irish Installers in 2026

To give context, here are the types of complete packages that Irish installers are quoting in 2026:

Package 1 — 3-bed semi, good insulation, UFH ground floor:

  • 6 kW Daikin Altherma 3 R
  • 180-litre HP cylinder
  • Daikin smart thermostat
  • 2 upstairs radiator upgrades
  • All electrical works
  • Commissioning and SEAI paperwork
  • Quoted price: €15,200 before grant / €8,700 after SEAI grant

Package 2 — 4-bed semi, BER C1, existing radiators, SEAI technical assessment:

  • 8 kW Mitsubishi Ecodan
  • 210-litre HP cylinder
  • MELCloud thermostat + zone valve
  • 4 radiator upgrades
  • Electrical works
  • Technical assessment (€200 grant)
  • Quoted price: €18,500 before grant / €11,800 after grants

Package 3 — 4-bed rural bungalow, BER D1, full retrofit:

  • 10 kW Grant Aerona⁴ R290
  • 250-litre HP cylinder
  • Smart controls, 2-zone
  • 5 radiator upgrades
  • Technical assessment
  • Quoted price: €21,500 before grant / €14,800 after grants

Tips for Getting Accurate Quotes

  1. Get three quotes minimum from SEAI-registered contractors
  2. Insist on a heat loss calculation (EN 12831) — any installer who quotes without one is guessing
  3. Ask what is included — cylinder, radiator upgrades, electrical works, commissioning, SEAI paperwork
  4. Compare SCOP predictions — ask each contractor what SCOP they are designing the system to achieve
  5. Check warranty terms — minimum 5-year compressor warranty from a registered installer; 7–10 years on many premium brands
  6. Ask about servicing — confirm whether the installer offers annual service contracts

See our detailed heat pump quote checklist for Ireland for a complete list of questions to ask.

Get 3 free heat pump quotes — free and no obligation.

Frequently asked questions

How much does a heat pump cost in Ireland in 2026?

A complete air-to-water heat pump installation in Ireland in 2026 typically costs €15,000–€22,000 before grants. After the SEAI heat pump grant of €6,500, the net cost is typically €8,500–€15,500 for most homes.

What is included in a typical heat pump installation quote?

A complete quote should include: the outdoor heat pump unit, indoor hydraulic module, hot water cylinder, controls and thermostat, all plumbing and refrigerant pipework, electrical works, commissioning, and assistance with SEAI grant paperwork. Ask explicitly whether radiator upgrades are included.

How do I get the SEAI €6,500 heat pump grant?

Apply through the SEAI website (seai.ie) before work commences. You will need to engage an SEAI National Register heat pump contractor and either have a BER of B2+ or commission a technical assessment (€200). SEAI pays the grant directly to your contractor after a post-installation inspection.

Why do heat pump installation quotes vary so much?

Quotes vary based on home size and complexity, the heat pump brand and size specified, whether radiator upgrades are included, the cylinder size, and local labour rates. Always compare like-for-like by checking what each quote includes.

Are there any hidden costs with heat pump installation?

Common additional costs not always included in initial quotes include: radiator upgrades (€250–€450 each), consumer unit upgrades (€600–€1,200), buffer tanks, and the SEAI technical assessment (€200, but grant-eligible). Always ask for a comprehensive scope of work before signing.

Sources & further reading