Best Electricity Tariff for a Heat Pump in Ireland 2026: Smart Rates Compared
Choosing the right electricity tariff for your heat pump can save you €300–€500 per year. This guide compares Ireland's major suppliers' smart night-rate tariffs and explains exactly how to minimise your heat pump electricity bill in 2026.
By Smart Solar Editorial · Updated 15 May 2026 · 7 min read

Choosing the right electricity tariff is one of the most impactful decisions a heat pump owner can make. The difference between running your heat pump entirely on the day rate versus optimising for the night rate can be €300–€500 per year on a typical Irish family home. This guide compares the available tariffs from Ireland's major electricity suppliers and explains how to maximise the savings.
Why Tariff Choice Matters So Much for Heat Pumps
Heat pumps are controllable loads — you can choose when they run using the system's smart controller or app. Unlike a kettle or television that needs to run in real time, a heat pump can:
- Pre-heat your home overnight using cheap night-rate electricity
- Store heat in your home's thermal mass (particularly effective with underfloor heating)
- Schedule hot water cylinder heating during the cheapest rate window
This flexibility means a heat pump owner can shift 60–80% of their electricity consumption to night-rate hours, dramatically reducing the effective unit rate they pay.
Understanding Irish Electricity Tariff Structures
Irish electricity tariffs for smart meter customers generally follow one of these structures:
Day/Night (Two-Rate): A fixed cheap rate during off-peak hours (typically 11pm–8am) and a more expensive rate during the day. This is the most common and usually the best for heat pump owners.
Day/Night/Peak (Three-Rate): An additional peak rate applies during high-demand periods (typically 5pm–7pm). Avoid heat pump operation during peak-rate periods.
Flat Rate: The same price 24 hours a day. Convenient but wastes the heat pump's scheduling advantage.
Demand-Based / Flex: Experimental tariffs where prices vary in real-time based on system demand. Can be very cheap at certain times but require more active management.
For most Irish heat pump owners, a two-rate Day/Night tariff from a major supplier offers the best combination of simplicity and savings.
Smart Meter Requirement
All time-of-use tariffs in Ireland require a smart meter — the modern digital meter installed by ESB Networks that transmits usage data every 30 minutes. If you do not yet have a smart meter, request one through your electricity supplier (no charge) or directly from ESB Networks. The rollout is continuing across all Irish addresses in 2026.
Once your smart meter is installed, you can switch to a time-of-use tariff with any registered electricity supplier.
Major Supplier Night-Rate Tariffs for Heat Pump Owners (2026)
Please note: Electricity tariffs change frequently. The rates below are representative indicative figures for 2026 based on publicly available information. Always check the current rates directly with suppliers before switching.
Electric Ireland
Electric Ireland is Ireland's largest electricity supplier and offers a Smart Plan for smart meter customers:
- Night rate (approx. 11pm–8am): approximately 12–14 c/kWh
- Day rate (approx. 8am–11pm): approximately 26–28 c/kWh
- Standing charge: approximately 20–24 c/day
- Additional benefits: Cashback offers, loyalty bonuses
- Smart app: Electric Ireland provides a smart energy monitoring app
Annual saving vs standard rate (4-bed semi, heat pump): approximately €350–€450 for a well-scheduled system.
Energia
Energia offers a smart home tariff specifically positioned for heat pump and EV owners:
- Night rate: approximately 11–13 c/kWh
- Day rate: approximately 26–28 c/kWh
- Standing charge: approximately 20–23 c/day
- EV / heat pump specific plans: Energia has periodically offered specific incentive tariffs for energy technology owners — check their website for current offers
Annual saving vs standard rate: approximately €360–€480.
SSE Airtricity
SSE Airtricity is part of the SSE group and competes strongly on price for smart tariff customers:
- Night rate: approximately 12–14 c/kWh
- Day rate: approximately 26–28 c/kWh
- Standing charge: approximately 21–24 c/day
- Smart product: "Night Boost" product designed for off-peak charging
Bord Gáis Energy
Bord Gáis operates in electricity as well as gas and offers:
- Smart night rate: approximately 12–14 c/kWh
- Day rate: approximately 26–28 c/kWh
- Standing charge: approximately 21–24 c/day
- Bundle discounts: Gas + electricity customers sometimes receive additional discounts
Note: If you are switching from a gas boiler to a heat pump, you no longer need your Bord Gáis gas connection, so the electricity-only option (or a switch to a non-gas supplier) may give you better rates.
Pinergy / Prepay Power
Smaller suppliers like Pinergy offer innovative tariff structures including time-of-use options. Check their websites for current heat pump-suitable products. These suppliers are often more agile with product innovation but may have less competitive standing charges.
How to Compare Tariffs: The Bill Estimator Method
Rather than comparing rates in isolation, use this method to estimate your annual bill under different tariffs:
- Estimate your annual heat pump electricity use (from our running cost guide)
- Estimate the split you can achieve: 70% night rate, 30% day rate is realistic with smart scheduling
- Calculate:
- Night-rate cost = (Annual kWh × 0.70) × night rate
- Day-rate cost = (Annual kWh × 0.30) × day rate
- Standing charge = rate per day × 365
- Total = night cost + day cost + standing charge
Example for 4-bed semi (4,500 kWh annual heat pump use):
- Night cost (70%): 3,150 kWh × 13c = €409.50
- Day cost (30%): 1,350 kWh × 27c = €364.50
- Standing charge: 22c × 365 = €80.30
- Total: €854/year
Compare this across your shortlisted suppliers and you have a clear basis for switching.
Use bonCOUR or switcher.ie (Ireland's comparison sites) for up-to-date tariff comparisons.
Heat Pump Control Scheduling: Maximising Night Rate
The heat pump's own controller or app is your main tool for maximising night-rate usage.
For Daikin Altherma: The Daikin Onecta app allows daily or weekly heating schedules. Set the heat pump to run at full heating mode from 11:30pm to 7:00am, then switch to a lower "setback" temperature or off during expensive peak hours.
For Mitsubishi Ecodan: MELCloud provides 48-hour time slot scheduling. Set heating blocks aligned with your supplier's night rate window.
For Samsung EHS: Samsung SmartThings integration allows automated rules — "if time is 11pm and outdoor temperature is below 10°C, set heat pump to comfort mode."
For Grant Aerona: The Grant Smart controller app provides time-zone scheduling for both space heating and hot water.
General scheduling strategy for a typical Irish family home:
- 11pm–7am (night rate): Heat pump runs at comfort mode (20°C target). Hot water cylinder is also heated during this window.
- 7am–9am: Brief top-up if needed
- 9am–5pm: Reduced setpoint (18°C) or scheduled holiday mode
- 5pm–7pm (peak rate if applicable): Avoid heat pump operation if possible; home retains heat from morning charge
- 7pm–11pm (day rate): Resume comfort mode for evening family time
With this schedule, 70–75% of heat pump electricity is consumed at the night rate — a significant saving.
Battery Storage: The Next Level
Homeowners with solar PV systems and battery storage can take tariff optimisation further. A home battery charged entirely during night rate (or from solar during the day) can power the heat pump's auxiliary systems during peak hours, eliminating even the modest day-rate consumption.
See our guide on solar and heat pump combination for a full analysis of this combination.
Get 3 free heat pump quotes — free and no obligation.
Frequently asked questions
What is the cheapest night-rate electricity price for a heat pump in Ireland?
In 2026, the cheapest night-rate electricity for smart meter customers is approximately 11–14 c/kWh from major suppliers including Electric Ireland, Energia, SSE Airtricity, and Bord Gáis. Rates change regularly, so compare current offers on switcher.ie or bonCOUR before committing.
Do I need a smart meter for a heat pump night rate in Ireland?
Yes. All time-of-use (night rate) electricity tariffs in Ireland require an ESB Networks smart meter. If you do not have one, request installation through your electricity supplier or ESB Networks directly — it is free of charge and installation typically takes 4–8 weeks.
How much can I save by using a night-rate tariff with my heat pump?
Switching from the standard day rate to a smart night-rate tariff and scheduling your heat pump to run 70% during the cheap window can save €300–€500/year for a 4-bed Irish home. This is one of the most impactful (and free) optimisations available to heat pump owners.
Which Irish electricity supplier is best for heat pump owners?
Electric Ireland, Energia, SSE Airtricity, and Bord Gáis all offer competitive smart night-rate tariffs suitable for heat pump owners. The best option depends on current promotional rates, standing charges, and any bundle discounts. Compare annually on switcher.ie or bonCOUR as rates change.
Can I switch electricity supplier after installing a heat pump?
Yes, and you should. The Irish electricity retail market is competitive and rates change regularly. You can switch supplier without any technical changes to your heat pump system. The smart meter and your MPRN number transfer with you. Annual switching can save an additional €50–€150 beyond the night-rate benefit.
Sources & further reading
- ESB Networks Smart Metering — ESB Networks
- Commission for Regulation of Utilities — Electricity Tariffs — Commission for Regulation of Utilities