Mitsubishi City Multi VRF for Irish Commercial Buildings

Mitsubishi Electric City Multi is Daikin VRV's closest competitor in the Irish commercial VRF market. The R2 hybrid series offers two-pipe simplicity with three-pipe heat recovery flexibility.

By Smart Solar Editorial · Updated 18 May 2026 · 11 min read

Mitsubishi Electric's Irish commercial footprint

Mitsubishi Electric Ireland, headquartered in Dublin's Blackrock Park, has been the second-largest commercial VRF supplier in the Irish market for over 20 years. The City Multi platform — Mitsubishi's branding for its commercial VRF range — holds approximately 28% Irish market share by installed capacity according to BSRIA Ireland's 2024 commercial HVAC tracker.

City Multi competes head-to-head with Daikin VRV for the same applications: Irish offices, hotels, retail, education and healthcare buildings needing multi-zone heating and cooling. The 2026 generation includes three main product lines:

  • Y series — two-pipe heat pump system (whole building heats or cools at any time)
  • R2 series — Mitsubishi's hybrid two-pipe-with-heat-recovery system (industry-unique architecture)
  • WR2 series — water-source VRF for hybrid heating and chilling applications

The R2 advantage — Mitsubishi's unique architecture

R2 is City Multi's distinctive feature in the Irish market. Conventional VRV/VRF heat recovery requires a three-pipe system (gas, liquid, suction) and Branch Selector boxes at each zone group. R2 achieves equivalent heat recovery functionality on a two-pipe system using a centralised BC Controller (Branch Circuit Controller) that splits supply between heating and cooling zones.

Practical advantages of R2 over conventional three-pipe systems:

  • Simpler installation — two pipes instead of three reduces installation labour 20–30%
  • Lower refrigerant inventory — typically 20–30% less refrigerant per kW capacity
  • Fewer joints, lower leak risk — fewer brazed connections in the pipework
  • Compatible with longer pipe runs in some configurations

Counterbalancing trade-offs:

  • BC Controller adds plant room space requirement
  • Slightly less efficient than dedicated three-pipe heat recovery at extreme load conditions
  • BC Controller is a single-point-of-failure for the heat recovery zones

For Irish projects, R2 has been particularly successful in mid-size offices and hotels (140–280 kW range) where the installation labour savings are meaningful but the maintenance complexity of full three-pipe systems is excessive.

Sizing City Multi for Irish projects

Mitsubishi's City Multi capacity range (per outdoor unit):

  • Y series: 22.4 kW to 168 kW per outdoor system
  • R2 series: 22.4 kW to 168 kW per outdoor system
  • WR2 series: 28 kW to 250 kW per water-source unit

Maximum building reach (newest 2025 generation):

  • Total pipe length: 250 m (Y/R2)
  • Vertical separation: 90 m
  • Furthest indoor unit: 165 m

These reach figures are slightly more generous than Daikin VRV 5's, making City Multi attractive for taller buildings and complex routing.

Indicative City Multi sizing for Irish commercial configurations:

  • 1,500 m² Cork office: 110–140 kW R2 system
  • 3,000 m² Dublin mid-rise office: 220–280 kW R2 (typically two outdoor units)
  • 5,000 m² four-star hotel: 350–420 kW combined Y for guest rooms + R2 for public areas
  • 12,000 m² corporate campus: 700–900 kW (multiple R2 systems)

Refrigerant transition

Mitsubishi has staged its R454B transition slightly differently from Daikin:

  • R32 City Multi Y series: Available since 2020, dominant 2022–2024 deployment
  • R32 City Multi R2 series: Available since 2022
  • R454B City Multi Y series: Launched 2024, primary 2026 specification
  • R454B City Multi R2 series: Launched 2025, increasing 2026 share
  • R290 City Multi (in development): Expected 2027 launch for monobloc applications

For 2026 Irish orders, R454B is the better forward-compatibility choice. R32 systems remain serviceable but the F-gas quota tightening through 2030 will progressively constrain service refrigerant availability.

Irish field performance

Monitored Irish City Multi installations show:

  • R2 Heat Recovery, well-designed office: SPF 3.8–4.2
  • Y series, single-tenant office: SPF 3.3–3.7
  • R2 in hotel with simultaneous demand: SPF 4.0–4.4

The R2 architecture typically delivers slightly higher field SPF than equivalent VRV 5 Heat Recovery installations because the centralised BC Controller manages heat recovery more aggressively than VRV's distributed Branch Selector approach. The trade-off is single-point sensitivity — a BC Controller failure can knock out heat recovery for a large building zone.

2026 installed pricing for City Multi in Ireland

Indicative installed pricing for Mitsubishi City Multi in Ireland in 2026:

  • 80 kW Y series, single outdoor: €65,000–€100,000 installed
  • 140 kW R2 series with BC Controller: €125,000–€195,000 installed
  • 280 kW R2 series, two outdoor units: €225,000–€360,000 installed
  • 560 kW R2 campus system: €490,000–€780,000 installed

City Multi typically prices 3–8% below equivalent Daikin VRV 5 in 2026 Irish projects — partly because of slightly thinner installer training requirements, partly competitive positioning.

Mitsubishi Ireland installer network

Mitsubishi Electric Ireland's accredited commercial installer network includes approximately 140 partners. Notable Tier-1 commercial contractors:

  • MJ Conroy Building Services — Dublin and Leinster commercial specialist
  • Sisk Building Services — large-scale healthcare and education
  • Ardmac — data centre and pharmaceutical projects
  • Trio Engineering Services — Cork and Munster commercial
  • BAM Building Services — public sector

Mitsubishi Ireland provides:

  • 5-year comprehensive warranty as standard
  • 10-year compressor warranty with annual O&M
  • M-Cloud remote monitoring included on commercial systems
  • 24-hour spares from Dublin and Cork hubs

Notable Irish City Multi projects

  • Microsoft One Microsoft Place (Sandyford): 450 kW R2 heat recovery for office floors
  • Maldron Hotel Newlands Cross: 280 kW City Multi heat recovery, EXEED-certified
  • Galway University Hospital MRI extension: City Multi cooling-led, replacing legacy CFC system
  • Citywest Conference Centre: 380 kW R2 system serving conference and exhibition halls

Choosing between Daikin VRV and Mitsubishi City Multi

For 2026 Irish commercial projects, the practical decision factors:

Choose Daikin VRV 5 when:

  • You need maximum installed base for tenant familiarity
  • Branch Selector flexibility for tenant fit-out partitioning matters
  • Daikin Cloud Plus integration with existing BMS is preferred
  • Existing site Daikin spares inventory

Choose Mitsubishi City Multi R2 when:

  • Installation labour cost is a major project sensitivity
  • Pipework routing is constrained or complex
  • Hotel or office with strong simultaneous heating-cooling demand
  • M-Cloud or Lossnay ventilation integration preferred
  • Slight (3–8%) capex advantage matters

For most Irish projects, either platform delivers a credible solution. The decision often comes down to local Tier-1 installer preference, existing site infrastructure, and end-user maintenance team familiarity rather than fundamental technical differences.

Outlook

Mitsubishi has signalled an R290 City Multi monobloc launch for 2027, which would put the brand ahead of Daikin on natural refrigerant adoption for commercial scale. The R454B transition in the existing R2 platform is well-advanced, and Mitsubishi Ireland's stocking strategy through 2026 prioritises R454B units for new commercial orders.

For Irish commercial buyers in 2026, Mitsubishi City Multi R2 R454B remains a strong specification choice — particularly for mid-size office and hotel projects where simultaneous heating-cooling demand and installation efficiency matter most.

Get 3 free commercial heat pump quotes — free and no obligation.

Frequently asked questions

How does Mitsubishi R2 differ from Daikin VRV Heat Recovery?

R2 uses a two-pipe system with a centralised BC Controller to manage heat recovery, versus Daikin VRV's three-pipe system with distributed Branch Selectors. R2 typically saves 20–30% on installation labour and uses 20–30% less refrigerant, but the centralised BC Controller is a single point of failure for heat recovery zones.

What is the SCOP of Mitsubishi City Multi in Irish conditions?

Field SPF on monitored Irish installations: 3.8–4.2 for R2 Heat Recovery in well-designed offices, 3.3–3.7 for Y-series in single-tenant offices, 4.0–4.4 for R2 in hotels with strong simultaneous demand. Catalogue SCOP figures apply to EN 14825 Average climate at A7/W35; Irish field at W45 is typically 0.6–0.9 lower.

How much does Mitsubishi City Multi cost in Ireland?

Indicative 2026 installed pricing: €65k–€100k for 80 kW Y, €125k–€195k for 140 kW R2, €225k–€360k for 280 kW R2 (two outdoors), €490k–€780k for 560 kW campus systems. Typically 3–8% below equivalent Daikin VRV 5 pricing.

Should I choose Daikin or Mitsubishi for my Irish commercial project?

Choose Daikin VRV 5 when Branch Selector flexibility for tenant fit-out matters and existing Daikin infrastructure is in place. Choose Mitsubishi City Multi R2 when installation efficiency, complex pipework routing or simultaneous heating-cooling demand are dominant. Both platforms deliver credible solutions for Irish 2026 commercial projects.

Sources & further reading