Daikin VRV 5 in Irish Commercial Buildings
Daikin VRV is the most-installed multi-zone commercial heat pump platform in Ireland. Here is how VRV 5 stacks up for Irish offices, hotels and mixed-use buildings in 2026.
By Smart Solar Editorial · Updated 18 May 2026 · 11 min read
VRV's dominant position in Irish commercial HVAC
Variable Refrigerant Volume (VRV) systems — Daikin's branding for the technology, with VRF being the generic industry term — have been the dominant multi-zone heat pump architecture for Irish commercial buildings for over a decade. By 2026, Daikin estimates over 14,000 VRV systems are operating in Ireland across offices, hotels, retail, healthcare and education sectors.
The current generation, VRV 5, launched in 2022 and refined through 2024–2025, represents a significant step forward on:
- Refrigerant — R32 single-component (2022 launch) and R454B blend (2025 update) replacing R410A
- Heat recovery capability — VRV 5 Heat Recovery captures heat from cooling zones and uses it in heating zones
- Connectivity — Daikin Cloud Plus and BACnet integration as standard
- Quietness — 39 dB(A) night-mode operation at typical configurations
- High-ambient performance — sustained heating capacity to –20 °C ambient
This article walks through VRV 5 specification, sizing, refrigerant choice, and what to expect in an Irish commercial 2026 procurement.
The VRV product family
Daikin VRV 5 comes in three primary configurations:
1. VRV 5 Heat Pump (single-pipe)
Standard heat pump configuration. The whole building runs in heating mode OR cooling mode at any given time. Suits buildings with relatively uniform zoning.
- Capacity range: 14–168 kW per system
- SCOP: up to 4.6 at A7/W35 (Irish climate adjusted: ~3.6 at W45)
- SEER: up to 7.4 (cooling efficiency)
- Refrigerant: R32
2. VRV 5 Heat Recovery (three-pipe)
Three-pipe system enables simultaneous heating and cooling in different zones. Heat extracted from cooling zones is transferred via a Branch Selector to heating zones. The premier configuration for multi-tenant offices and hotels with simultaneous demand.
- Capacity range: 22–168 kW per system
- SCOP: up to 4.8 with heat recovery active (Irish: ~4.0 with recovery)
- Refrigerant: R32 (R454B from 2025)
- Branch Selector boxes required at zone group level
3. VRV 5 Heat Pump R454B
The newest variant, launched 2025 and increasingly the default for large 2026 projects. Lower GWP refrigerant (466 vs 675), same operating characteristics as R32 versions.
Sizing VRV for Irish commercial buildings
Daikin's VRV 5 sizing follows a connection ratio approach:
- Indoor unit capacity total can be 50–130% of outdoor unit capacity
- Typical Irish design ratio: 100–110% (allows for full diversity without oversizing)
- Maximum indoor units per outdoor: 64 units, but practical limit is usually 30–40 for Irish projects
Indicative VRV 5 sizing for common Irish commercial configurations:
- 1,200 m² Dublin office (BER B): 90–120 kW VRV 5 Heat Recovery
- 3,500 m² mid-size office (BER A3): 220–290 kW VRV 5 Heat Recovery (multiple outdoor units)
- 5,000 m² hotel: 300–450 kW VRV 5 (typically split heating-only and heat recovery zones)
- 15,000 m² corporate campus: 800–1,100 kW VRV 5 (multiple systems and Branch Selectors)
Irish climate performance considerations
Daikin's VRV 5 catalogue figures are based on EN 14825 Average climate (Strasbourg). For Ireland, three climate adjustments apply:
- Lower defrost cycle frequency than continental Europe (Irish ambient rarely below –3 °C)
- Higher average winter humidity (90%+ relative humidity is common) — slightly more frequent defrost
- Less heating-cooling overlap than southern Europe — heat recovery savings somewhat lower
Irish field SPF data from monitored Dublin office installations:
- VRV 5 Heat Recovery, well-designed multi-tenant office: SPF 3.7–4.1
- VRV 5 Heat Pump, single-tenant office: SPF 3.3–3.7
- VRV 5 in hotel, multiple zones with simultaneous demand: SPF 3.8–4.2
Refrigerant pipework and charge limits
VRV systems use long refrigerant runs between outdoor units and indoor units, which raises three Irish-specific design considerations:
-
Maximum pipe run — 165 m total length per outdoor system, 50 m vertical separation, 90 m furthest indoor unit from outdoor unit. These constraints often determine whether VRV is feasible on tall or sprawling buildings.
-
Refrigerant charge — VRV systems hold 5–40 kg of refrigerant depending on pipe length. EU F-gas Regulation 2024/573 requires annual leak testing for systems holding ≥5 tonnes CO₂-equivalent (about 7.4 kg R32 or 10.7 kg R454B). Most commercial VRV systems trigger this requirement.
-
Refrigerant safety classification — R32 and R454B are both A2L (mildly flammable). EN 378 sets maximum charge per occupied space. In small rooms (under 50 m² with limited natural ventilation) charge limits can require additional refrigerant detection or alternative system configuration.
Daikin Ireland network
Daikin Ireland (headquartered in Dublin, with sales offices in Cork, Galway and Belfast) maintains a network of approximately 180 trained installation partners across the island. Key Tier-1 partners for commercial VRV projects:
- Mercury Engineering — full-scope MEP including large VRV projects
- Designer Group — major Dublin office VRV specialist
- JSA Mechanical & Electrical — Cork and Munster-focused
- Glan Agua — Galway and West-focused
- BAM Building Services — public sector and large commercial
Daikin Ireland also offers:
- 5-year compressor warranty as standard, extendable to 10 years with annual O&M contract
- 24-hour spares network from Dublin, Cork and Belfast distribution centres
- Daikin Cloud Plus remote monitoring included for 5 years on commercial systems
2026 installed pricing for VRV in Ireland
Indicative installed pricing for Daikin VRV 5 systems in Ireland in 2026:
- 80 kW VRV 5 Heat Pump, single outdoor: €70,000–€110,000 installed
- 140 kW VRV 5 Heat Recovery, single outdoor + branch boxes: €130,000–€200,000 installed
- 280 kW VRV 5 Heat Recovery, two outdoor units: €230,000–€370,000 installed
- 560 kW campus-scale VRV 5 (4 outdoor systems): €500,000–€800,000 installed
These figures include outdoor units, indoor units (typically ceiling-cassette or ducted), refrigerant pipework, Branch Selector boxes, controls and commissioning. They exclude electrical supply works and main contractor preliminaries.
Operational and maintenance lessons
Long-running Irish VRV installations have surfaced several operational lessons:
- Annual refrigerant leak test is mandatory above the 5-tonne CO₂e threshold — budget €600–€1,500 per system
- Filter cleaning quarterly is the single biggest operator-controlled efficiency lever
- Branch Selector boxes need annual inspection — failed selectors can silently degrade heat recovery
- Software firmware updates — Daikin Cloud Plus pushes critical efficiency updates; don't disable
- Compressor scheduling — modern VRV will run multiple compressors at part-load if not configured properly; verify staging strategy at commissioning
VRV vs alternatives — when to specify
VRV is the right answer when:
- Multi-tenant building with simultaneous heating and cooling demand
- Individual zone control required by tenant lease structure
- Limited plant room space (refrigerant-only distribution, no large pipework)
- Refurbishment retrofit with limited risers
- Mid-rise building (under 165 m piping reach)
VRV is the wrong answer when:
- Large simple zoning with uniform demand (LPHW is cheaper)
- Building above 50 m vertical separation (exceeds piping limits)
- DHW is a major load (VRV is poor at high-temperature DHW)
- F-gas exposure is a corporate concern (LPHW with R290 monobloc avoids large refrigerant inventory)
Outlook
Daikin VRV 5 will remain the dominant Irish commercial multi-zone heat pump platform through 2026–2028. The 2025 R454B variant addresses the immediate F-gas regulation pressure, and the upcoming VRV 6 (announced for 2027 launch) is expected to introduce hybrid R290 outdoor units that move the technology closer to natural refrigerants while preserving the architecture's flexibility.
For Irish commercial buyers in 2026, VRV 5 — particularly the Heat Recovery R454B variant — remains the most predictable, well-supported and commissionable specification for multi-zone heat pump deployments.
Get 3 free commercial heat pump quotes — free and no obligation.
Frequently asked questions
What is the SCOP of Daikin VRV 5 in Irish conditions?
VRV 5 Heat Recovery in well-designed Irish offices delivers SPF 3.7–4.1 in field operation; VRV 5 Heat Pump delivers SPF 3.3–3.7. Catalogue SCOP figures (4.6–4.8) are based on EN 14825 Average climate at A7/W35; Irish field performance at W45 is typically 0.6–1.0 lower.
How much does a Daikin VRV 5 system cost in Ireland?
Indicative 2026 installed pricing: €70k–€110k for 80 kW, €130k–€200k for 140 kW Heat Recovery, €230k–€370k for 280 kW (two outdoor units), €500k–€800k for 560 kW campus systems. Pricing includes outdoor units, indoor units, refrigerant pipework, Branch Selectors and commissioning.
Should I specify R32 or R454B Daikin VRV 5?
For 2026 new orders, R454B is the better forward-compatibility choice — lower GWP (466 vs 675), longer service refrigerant supply horizon, and same operating performance. Existing R32 installations remain serviceable but face F-gas quota tightening through 2030.
What is the maximum building size for a single Daikin VRV 5 system?
165 m total pipe length, 50 m vertical separation, 90 m furthest indoor unit. This typically suits buildings up to about 15 floors. Larger buildings require multiple VRV systems or a switch to centralised LPHW. Each VRV outdoor unit serves up to 168 kW and 64 indoor units.
Sources & further reading
- Daikin Europe VRV 5 Product Information — Daikin Europe
- EU F-Gas Regulation 2024/573 — EUR-Lex
- EN 378 Refrigerating Systems Safety Standard — CEN