Heat Pumps for Irish Schools: Department of Education Pathway

The Department of Education's Pathfinder Programme has made schools a flagship sector for Irish commercial heat pump deployment. Here is how the projects are scoped, funded and delivered.

By Smart Solar Editorial · Updated 18 May 2026 · 11 min read

Schools are the Irish State's flagship heat pump test bed

Since 2017, the Department of Education's Pathfinder Programme — delivered jointly with SEAI — has used Irish primary and secondary schools as the flagship test bed for whole-of-building energy retrofit, including comprehensive heat pump deployment. By end-2025 over 75 schools had been delivered through the programme, with around 250 more in the 2025–2030 pipeline.

This is the most concentrated commercial heat pump programme in the Irish public sector and has set procurement, design and operational benchmarks now used widely in the private sector as well.

What a Pathfinder school project actually delivers

A typical Department of Education Pathfinder retrofit includes:

  • Fabric upgrade — external wall insulation, roof insulation, triple-glazed windows, mechanical ventilation with heat recovery (MVHR)
  • Heating system replacement — oil or gas boiler removed, air-to-water heat pump installed
  • Distribution upgrade — radiator resizing or underfloor heating retrofit for low-temperature operation
  • Rooftop solar PV — typically 25–80 kWp
  • Lighting upgrade — LED throughout with daylight controls
  • Building management system — full BMS with metered energy reporting

The fabric work is essential. Without it, the heat pump would operate at high flow temperature and poor SCOP. The integrated package typically takes a 1970s–1990s Irish school from BER E1/D2 to BER A3/B1.

Sizing for Irish schools

Irish schools have a distinctive load profile: occupancy concentrated Monday–Friday 09:00–16:00 during school terms, deep overnight setback, weekend and summer holiday shutdown. This makes them excellent heat pump candidates because the system can pre-heat overnight on low-tariff electricity and ride through the day.

Indicative sizing:

  • Small rural primary school, 400–800 m², 60–120 pupils: 30–60 kW
  • Medium urban primary, 1,200–2,000 m², 200–350 pupils: 60–110 kW
  • Large secondary school, 5,000–8,000 m², 600–900 pupils: 180–300 kW
  • PE hall, sports campus, 1,500 m²: 50–80 kW (typically a separate system)

Sport halls present a special design challenge because of high ventilation rates and large volume — typically a dedicated air handling unit with integral heat pump and heat recovery, rather than relying on the main building system.

DHW is usually minimal

Unlike hotels or care homes, Irish schools have very modest DHW demand — typically only handwashing and a small kitchen. This simplifies the heat pump design considerably, allowing the primary system to focus on low-flow-temperature space heating without compromise for DHW pasteurisation.

Where catering kitchens are present (full secondary schools), a small dedicated DHW heat pump (typically 6–12 kW R290) handles the catering load separately.

2026 installed pricing for Irish school projects

  • Small primary school, 50 kW system as part of full Pathfinder: €80,000–€140,000 (heat pump element only)
  • Large primary school, 100 kW heat pump: €120,000–€200,000
  • Secondary school, 250 kW heat pump: €180,000–€320,000
  • Secondary campus including sports hall, 350 kW total: €270,000–€450,000

Full Pathfinder retrofit (fabric + heat pump + PV + lighting + BMS) typically costs €1,800–€3,200/pupil place. A 500-pupil secondary school project lands in the €900k–€1.6M range.

Funding pathway

Department of Education school heat pump projects access funding through:

  1. DoE Schools Building Unit capital allocation — covers the bulk of the project cost as part of the broader minor works or major capital programme
  2. SEAI Pathfinder Programme co-funding — typically 30–50% additional grant for the energy-related elements
  3. PV-specific funding — through SEAI Non-Domestic Microgen Scheme for the solar element

Private secondary schools (Educate Together at fee-paying level, voluntary schools outside the free school scheme) can access EXEED grant on the same terms as commercial buildings — up to 30% of eligible capex.

The temperature setpoint debate

Department of Education TGD-021 specifies indoor design temperatures:

  • Classrooms: 18 °C in occupied hours, 12 °C overnight setback
  • Special needs classrooms: 21 °C in occupied hours
  • Sports halls: 14 °C in use, 10 °C setback
  • Circulation and toilets: 16 °C in occupied hours

These are unusually low compared to commercial offices, which dramatically favours heat pump performance. SCOP of 3.8–4.2 is achievable in well-designed Irish primary schools with W40 flow temperature to upsized radiators or underfloor heating.

Acoustic and resilience constraints

School heat pump installations face specific constraints:

  • Acoustic — 35 dB(A) outside any classroom or learning space during teaching hours
  • Safety — outdoor units in fenced enclosures, no climbable surfaces near pupil play areas
  • Resilience — heating failure during school term triggers DoE notification; backup electric heating capacity to 60% of design load typically required

Notable Irish school heat pump deployments

  • Mercy Secondary School Mounthawk, Tralee: 280 kW Mitsubishi system, BER B1 post-retrofit
  • St Joseph's College Lucan: 220 kW Daikin Altherma, Pathfinder Phase 4
  • Coláiste Choilm Ballincollig: 180 kW heat pump plus 60 kWp rooftop PV
  • Educate Together Bray: 90 kW heat pump on NZEB new-build, BER A2

Procurement reality

Department of Education projects run through Office of Government Procurement (OGP) frameworks with prequalified suppliers. The standard delivery model is design-build with an MEP consultant overseeing on behalf of the school patron. Lead times are unusually long — typically 18–24 months from school board approval to commissioned plant — because of the embedded planning, statutory consultation and procurement steps.

Private schools and ETBI sector projects typically run on shorter (12–14 month) timelines via direct procurement.

Operational lessons from delivered projects

Several lessons have emerged from the first wave of Irish school heat pump deployments:

  1. Setback discipline matters — schools that overrode the BMS overnight setback saw SPF drop from 3.8 to 2.6
  2. Window opening discipline — opened windows during heating season destroy SCOP; CO₂ monitoring helps
  3. PV self-consumption — schools that aligned heat pump pre-heat with PV peak generation captured an additional 12–18% effective electricity cost reduction
  4. Caretaker training is essential — schools without trained on-site operators saw 20–30% worse SPF than equivalents with trained staff

Outlook for Irish school heat pump programme

The 2025 revision of the National Development Plan committed to retrofitting 800 schools to BER B by 2030 as part of the broader Schools Programme. With approximately 75 delivered to date, this implies a pipeline of around 725 schools — making the sector one of the most predictable and structured commercial heat pump opportunities for Irish MEP consultants, contractors and equipment suppliers for the rest of the decade.

Get 3 free commercial heat pump quotes — free and no obligation.

Frequently asked questions

What size heat pump does an Irish primary school need?

A small rural primary (400–800 m²) typically requires 30–60 kW. A medium urban primary (1,200–2,000 m²) needs 60–110 kW. The lower design temperatures specified by DoE TGD-021 (18 °C in classrooms, 12 °C overnight setback) make Irish schools particularly efficient heat pump applications, with SCOP commonly 3.8–4.2.

How is a school heat pump project funded in Ireland?

Department of Education Schools Building Unit covers the bulk through capital allocation, with SEAI Pathfinder Programme adding 30–50% co-funding for the energy elements. Private fee-paying schools access EXEED on commercial terms (up to 30% of eligible capex).

Can a school heat pump be retrofitted without fabric upgrades?

Possible but rarely advisable. Without fabric upgrades the building requires high flow temperatures (W55–W65) that drop SCOP to 2.5–2.9, undermining the carbon and operating cost case. Full Pathfinder retrofit integrates fabric, heat pump, PV and BMS as a package.

How long does a Pathfinder school heat pump project take?

Typical Department of Education timeline is 18–24 months from school board approval to commissioned plant. Private schools and ETBI projects on direct procurement typically deliver in 12–14 months. Construction normally happens during summer holidays to minimise disruption.

Sources & further reading