EXEED Grant for Commercial Heat Pumps: How to Capture 30%

EXEED is the single biggest financial lever on any Irish commercial heat pump project — up to 30% capex rebate, capped €3M. Here is how the process actually works and where most applicants fail.

By Smart Solar Editorial · Updated 18 May 2026 · 11 min read

What EXEED actually is

EXEED — the Excellence in Energy Efficient Design programme — is the SEAI grant scheme for whole-of-building energy-efficient design certification on commercial and public sector projects in Ireland. It is the single largest grant lever available to commercial heat pump buyers in 2026.

Headline numbers:

  • Up to 30% capex grant on eligible project costs
  • Cap of €3 million per project
  • Minimum project size €100,000 eligible capex
  • Applicable to new build, retrofit and refurbishment
  • Applicable across heat pump, lighting, ventilation, controls, building fabric

EXEED is not a heat-pump-specific grant — it funds the broader energy-efficient design project of which the heat pump is a part. This matters because eligible scope is wider than just the heat pump equipment.

The five EXEED gateway reviews

EXEED is delivered through five gateway reviews, each requiring sign-off from an SEAI-approved EXEED Mentor before the next phase can begin:

  1. Gateway 1 — Energy Performance Targets. Project owner sets and signs off energy-efficient targets at concept stage.
  2. Gateway 2 — Design Brief. Energy targets translated into specific design brief for MEP consultant.
  3. Gateway 3 — Detailed Design. Stage 4 detailed design demonstrably meets the targets.
  4. Gateway 4 — Construction. Construction phase confirms compliance with the certified design.
  5. Gateway 5 — Operational Performance. Post-handover monitoring confirms measured performance against targets.

This sequence is fundamentally different from typical SEAI domestic grants, which are paid against installed equipment. EXEED is paid against demonstrated design excellence and measured performance, not just kit installation. Skipping or rushing the gateways is the #1 reason EXEED applications fail.

Eligibility criteria

EXEED is available to:

  • Private commercial businesses of any size (SME and large enterprise)
  • Public sector bodies (Local Authorities, HSE, OPW, schools, universities)
  • Community and not-for-profit organisations

Project criteria:

  • Minimum €100,000 eligible capex
  • Maximum €10M eligible capex per project (above which the 30% cap converts to a lower flat percentage)
  • Project must use the SEAI EXEED Methodology and be certified by an approved EXEED Mentor
  • Equipment must be on the SEAI Triple-E Register where Triple-E categories exist (heat pumps included)
  • Project must demonstrate energy performance materially above the baseline (typically 25–40% improvement)

What capex EXEED actually covers

EXEED eligible capex on a heat pump project typically includes:

  • Heat pump equipment (Triple-E registered) — 100% eligible
  • Refrigerant pipework and insulation — 100%
  • Hydraulic distribution pipework, valves, pumps, expansion vessels — 100%
  • Controls, sensors, building management system — 100%
  • Sub-metering and energy monitoring — 100%
  • Plant room civils directly required by the heat pump — typically 50–70%
  • Distribution emitters (radiators, fan coils, UFH) where required by the heat pump conversion — typically 70–100%
  • MEP design fees — typically 70–80%
  • EXEED Mentor fees — 100%

Eligible capex typically excludes:

  • Existing equipment replacement on a like-for-like basis
  • Tenant fit-out works
  • Main contractor preliminaries (although a pro-rata allocation is usually permitted)
  • ESB Networks supply connection fees
  • Planning permission and statutory consent fees

Typical EXEED grant capture by project type

Real Irish commercial heat pump project EXEED capture, 2024–2025 data:

  • Office retrofit, gas to heat pump: 22–28% of project capex
  • Hotel retrofit, gas to heat pump + DHW: 25–30%
  • Care home retrofit, oil to heat pump: 28–30%
  • School full Pathfinder retrofit: 30% (subject to alternative funding stack)
  • Industrial process heat pump: 25–30%
  • Leisure centre heat pump: 27–30%

Projects with higher baseline carbon intensity (oil and LPG replacement) and longer operating hours (hotels, care homes, leisure centres) typically capture toward the top of the range.

The EXEED Mentor — your most important contractor

The EXEED Mentor is the SEAI-approved energy consultant who shepherds your project through all five gateways. Mentor selection is the single most important procurement decision in the EXEED process. Mentors are listed in the SEAI EXEED Mentor Register and include both independent consultants and the energy practices of major Irish engineering firms.

What a good EXEED Mentor does:

  • Sets defensible energy targets at Gateway 1 that are stretching but achievable
  • Translates targets into specific MEP design requirements
  • Reviews tender documentation before issue
  • Audits design and construction against targets at each gateway
  • Owns post-commissioning monitoring and reporting

Mentor fees typically run €15,000–€60,000 across the full project lifecycle, depending on project size. The fees are themselves eligible for EXEED grant.

The 90-day application timeline

A realistic EXEED application timeline:

  • Week 0: Engage Mentor, define project scope
  • Week 2–4: Gateway 1 energy target setting, Mentor sign-off, application to SEAI
  • Week 5–8: SEAI review of Gateway 1 submission
  • Week 9–10: SEAI Gateway 1 approval and grant offer letter
  • Week 11–24: Gateway 2 design brief development in parallel with project design
  • Week 25–40: Gateway 3 detailed design submission and approval
  • Week 41–60: Construction phase, Gateway 4 confirmations
  • Week 61–72: Commissioning, handover, Gateway 5 baseline establishment
  • Year 1–2 post-commissioning: Operational performance monitoring
  • 24 months post-commissioning: Final EXEED grant payment

The grant is drawn down in tranches against gateway completion, not paid as a lump sum at the end. Cash flow planning is essential.

Common reasons EXEED applications fail

Drawing from SEAI's published case studies and feedback from Irish EXEED Mentors:

  1. Targets set too late. Trying to retrofit EXEED onto a project already at Stage 4 design typically fails Gateway 1.
  2. Insufficient baseline data. Without 12 months of metered baseline energy data, target-setting is challengeable.
  3. No Triple-E equipment selection. Equipment specified before Triple-E lookup often turns out ineligible.
  4. Design changes during construction without Mentor sign-off. Departures from certified design typically lose grant.
  5. Failure to commission energy meters. Gateway 5 requires measured performance — no meters, no grant.
  6. Single-source funding overlap. Schools using DoE capital cannot also claim EXEED on the same scope. Local authorities using Sport Ireland funding face similar overlap restrictions.

EXEED + ACA + other grants — what stacks?

Irish commercial heat pump funding combinations:

  • EXEED + ACA: YES — the standard combination. EXEED rebates capex, ACA shields the remaining capex against corporation tax at 12.5%.
  • EXEED + SEAI Heat Pump Support Scheme: NO — single-grant rule applies for sub-50 kW projects.
  • EXEED + Better Energy Communities: NO — single-grant rule.
  • EXEED + Sport Ireland Major Capital: USUALLY NO — confirm at Gateway 1.
  • EXEED + Department of Education capital: USUALLY NO for the same scope.

Practical tips for maximising EXEED capture

  1. Engage your Mentor before any design begins. Stage 1 engagement saves multiples in fees later.
  2. Sub-meter the existing system for 12 months minimum before Gateway 1.
  3. Specify only Triple-E registered equipment. Verify the register entry before tender issue.
  4. Build measured-performance clauses into your tender. Make the contractor liable for SPF, not just nameplate SCOP.
  5. Plan plant room civils to be eligible. Repurposing existing plant room versus building new affects eligibility ratio.

EXEED done well is a transformative grant for Irish commercial heat pump projects, routinely shifting the post-tax payback from 8 years to under 5. Done poorly — or applied for too late — it pays nothing. Engage early, mentor well, document everything.

Get 3 free commercial heat pump quotes — free and no obligation.

Frequently asked questions

How much can I get from EXEED for a commercial heat pump?

Up to 30% of eligible capex, capped at €3M per project. Heat pump equipment, refrigerant and hydraulic pipework, controls and sub-metering are 100% eligible. Plant room civils and MEP fees are typically 50–80% eligible. Most projects capture 22–30% of total project cost.

Can I claim EXEED on a project that's already started?

Effectively no. EXEED requires Gateway 1 (energy target setting) to be signed off before detailed design begins. Trying to retrofit EXEED onto a project already at Stage 4 design typically fails Gateway 1 because targets cannot be demonstrated to have shaped the design.

What is an EXEED Mentor and do I have to use one?

Yes, mandatory. An EXEED Mentor is an SEAI-approved energy consultant who certifies your project through all five gateways. Listed in the SEAI EXEED Mentor Register. Fees typically €15k–€60k across the project, themselves eligible for EXEED grant.

How is the EXEED grant paid out?

In tranches against gateway completion, not as a lump sum. Typical cash flow: 10–20% at Gateway 1 approval, 20–30% at Gateway 3 design certification, 40–50% at Gateway 4 construction completion, balance at Gateway 5 measured performance verification (typically 12–24 months post-commissioning).

Sources & further reading