Commercial Heat Pumps in Ireland: The 2026 Buyer's Guide

Commercial heat pumps are now the default specification for new Irish hotels, offices, schools and care homes. This guide explains how they work, what they cost, and where the SEAI grants land in 2026.

By Smart Solar Editorial · Updated 18 May 2026 · 11 min read

Why 2026 is the tipping point for Irish commercial heat pumps

Commercial heat pumps moved from a "nice to have" sustainability story to a hard regulatory and economic requirement in Ireland over the last 24 months. The combination of Part L 2022 (with NZEB performance for new non-domestic buildings), the Climate Action Plan 2024 target of 400,000 commercial-scale heat pumps installed by 2030, and persistent natural gas pricing above €0.08/kWh has reshaped what MEP consultants are specifying on Irish projects.

For commercial property owners in Dublin, Cork, Galway and Limerick, the practical question is no longer "should we install a heat pump?" but "which architecture, what size, and how do we capture the EXEED grant?". This guide walks through the answers.

What counts as a "commercial" heat pump in an Irish context

Anything above roughly 30 kW thermal output is treated as a commercial installation. Below that you are in the domestic / light-commercial space served by single split units and the SEAI domestic Better Energy Home Scheme. Above 30 kW you move into:

  • Air-to-water monobloc and split units from 30 kW up to about 180 kW per cabinet
  • Air-to-air VRV/VRF systems like Daikin VRV 5 and Mitsubishi City Multi, scaled in 14 kW modules up to ~150 kW per system
  • Water-source and ground-source units, typically 50–500 kW for hotels, leisure centres and district schemes
  • High-temperature industrial heat pumps delivering 75–95 °C flow temperatures for process heat

Most Irish commercial projects in 2026 land in the 50–500 kW band, replacing gas-fired boilers or end-of-life direct electric heating.

How a commercial heat pump actually performs

A commercial heat pump does not "create" heat — it moves it. A refrigerant absorbs low-grade heat from outside air, ground loops or a water body, gets compressed to a higher temperature, and releases that heat into the building's heating circuit. Efficiency is measured two ways:

  • COP (Coefficient of Performance): instantaneous heat output divided by electrical input. A unit at COP 4.0 delivers 4 kW of heat for every 1 kW of electricity.
  • SCOP (Seasonal Coefficient of Performance): the weighted average across an Irish heating season. SCOP is what actually matters for your energy bill and your BER calculation.

In the relatively mild Irish climate (average winter outdoor temperatures of 4–7 °C) a properly designed air-source commercial system typically delivers SCOP 3.2–3.8 when paired with low-temperature radiators or underfloor heating at 45 °C flow, dropping to 2.6–3.0 when retrofitted to existing 70 °C radiator circuits.

Typical 2026 capital costs

Indicative installed pricing on Irish commercial projects this year:

  • 50 kW air-to-water system (small office, GP surgery, primary school): €40,000–€70,000 installed
  • 150 kW system (mid-sized office, care home): €110,000–€190,000 installed
  • 250 kW system (large hotel, secondary school): €150,000–€280,000 installed
  • 500 kW VRV/VRF system (luxury hotel, large commercial complex): €350,000–€600,000 installed
  • Ground-source array, 250 kW with boreholes: €450,000–€750,000 installed

These ranges include plant, pipework, controls, electrical upgrade, plant room building works and commissioning, but exclude any tenant fit-out or distribution upgrade. They also assume a single Tier-1 OEM (Daikin Ireland, Mitsubishi Electric Ireland, Carrier Ireland, or Vaillant Ireland) and a competent MEP contractor such as Mercury Engineering, Sisk Building Services or BAM Building Services.

The Irish grant landscape in 2026

Three SEAI mechanisms drive the commercial heat pump economics:

  1. EXEED Certified Grant — up to 30% of eligible project cost capped at €3 million per project, available where the heat pump is part of a wider energy-efficient design certified to the EXEED standard. EXEED is the single largest lever for capex-heavy projects above €200k.
  2. SEAI Heat Pump Support Scheme (administered through the Better Energy Communities and the Non-Domestic Microgen Scheme for smaller installs) — tiered grants for SMEs replacing oil or gas heating with heat pumps under 50 kW.
  3. Accelerated Capital Allowance (ACA) — heat pumps on the SEAI Triple-E Register qualify for 100% first-year capital allowance at the standard 12.5% corporation tax rate, materially improving after-tax payback.

Stacking EXEED plus ACA on a €250k project routinely brings net post-tax capex below €130k, which is typically where payback drops under five years on gas-replacement projects.

BER B compliance and Part L

For new commercial buildings, NZEB performance under Part L 2022 effectively requires a heat pump (or equivalent renewable heat source). For existing commercial buildings, a BER B rating — increasingly required by institutional landlords, ESG-conscious tenants and the planned commercial Minimum Energy Performance Standards — is rarely achievable without replacing fossil heating with a heat pump.

This is why the conversation is moving from "should we?" to "when?". Property owners holding gas-heated commercial stock face an increasingly steep discount at sale or refinancing if BER B is not on the cards.

Choosing an architecture

A simple decision tree for 2026 Irish projects:

  • Single-tenant office or care home, 50–250 kW: air-to-water monobloc with low-temperature radiators or underfloor heating
  • Multi-tenant office or hotel with strong simultaneous heating and cooling demand: VRV/VRF with heat recovery (Daikin VRV 5, Mitsubishi City Multi R2)
  • Leisure centre with pool, year-round consistent load: ground-source or water-source with desuperheater for DHW
  • Industrial process heat, 70–95 °C: R290 or R744 (CO₂) high-temperature heat pump

Next steps for Irish commercial property owners

  1. Commission a Stage 1 EXEED feasibility study with an SEAI-registered energy consultant
  2. Get the existing heating system load profiled — not just nameplate capacity
  3. Specify SCOP, not COP, in the tender
  4. Insist on commissioning records and a 24-month performance guarantee
  5. Engage your MEP consultant early on plant room space, electrical capacity and acoustic constraints

Commercial heat pumps are no longer experimental in Ireland. With the right design and grant stack, they are the lowest-lifetime-cost heating option for most non-domestic buildings in 2026.

Get 3 free commercial heat pump quotes — free and no obligation.

Frequently asked questions

What size heat pump does an average Irish commercial building need?

A 1,500 m² Irish office to BER B typically requires 80–120 kW of heat pump capacity. A 3,000 m² hotel with DHW demand runs 200–300 kW. Always size from a measured load profile rather than nameplate boiler capacity, as gas boilers in Irish commercial stock are routinely oversized by 30–50%.

How much does a commercial heat pump cost in Ireland in 2026?

Installed pricing is €40k–€70k for 50 kW, €150k–€280k for 250 kW, and €350k–€600k for a 500 kW VRV system. EXEED can rebate up to 30% and ACA gives 100% first-year capital allowance at 12.5% corporation tax.

Can I get a heat pump to BER B on an existing Irish commercial building?

Yes, but it typically requires fabric upgrades alongside the heat pump — usually roof insulation, glazing upgrades and improved airtightness. A BER B retrofit on a 1990s Irish office costs €250–€500/m² total, of which the heat pump is around 25–35%.

What is the lifetime of a commercial heat pump in Ireland?

Tier-1 commercial heat pumps from Daikin, Mitsubishi, Carrier and Vaillant carry a 20–25 year design life with major refrigerant circuit replacement typically required at year 15. Compressor warranties are usually 5 years extendable to 10 with an O&M contract.

Do I need planning permission for a commercial heat pump in Ireland?

Rooftop and ground-mounted external units below 20 kW typically fall under exempted development. Larger installations, those visible from a public road, or those in conservation areas usually require planning. Acoustic assessment is required where the nearest noise-sensitive receptor is within 30 m.

Sources & further reading