Commercial Ground Source Heat Pump Arrays in Ireland
Ground source heat pumps deliver SCOP 4.5+ and 25-year stability that no air-source unit can match. Here is the Irish commercial drilling, design and capex landscape in 2026.
By Smart Solar Editorial · Updated 18 May 2026 · 11 min read
Why ground source still matters in 2026
Ground source heat pumps (GSHPs) have lost ground to improved air-source technology over the last decade — but for Irish commercial projects with the right site conditions, GSHP still delivers performance and stability that air-source cannot match:
- SCOP 4.5–5.5 versus 3.2–4.0 for air-source in equivalent Irish conditions
- Zero defrost cycles — ground temperature stable at 10–12 °C year-round
- 25-year ground loop service life versus 12–18 years for air-source outdoor units
- No outdoor mechanical plant — quiet, visually unobtrusive, no acoustic constraints
- Reversibility — same loop provides chilling in summer with COP 5+
The single barrier is upfront capex, driven primarily by drilling cost. In 2026, Irish commercial drilling pricing has stabilised at €38–€60 per metre depth for cased borehole, making GSHP a serious procurement option for projects with predictable 25-year operating profiles.
Two array configurations for Irish commercial sites
1. Vertical borehole arrays
Vertical borehole arrays drill closed-loop pipework circuits 80–200 m deep into the ground. Each borehole typically delivers 4–6 kW thermal capacity in Irish geology. Multiple boreholes spaced 6–8 m apart in a grid provide the total array capacity.
Typical borehole array specifications:
- Borehole depth: 100–150 m typical, up to 200 m possible
- Borehole diameter: 110–150 mm
- U-tube or coaxial probe in HDPE pipe with antifreeze (typically monopropylene glycol 25%)
- Bentonite grout for thermal coupling
- Spacing: 6–8 m minimum to avoid thermal interference
For a 250 kW Irish commercial GSHP project, vertical array typically requires:
- 50–60 boreholes × 120 m depth = 6,000–7,200 m total drilling
- Footprint approximately 800–1,200 m² (grid spacing)
- Drilling duration approximately 8–12 weeks
2. Horizontal trenched arrays
Horizontal arrays lay pipework in trenches 1.5–2.5 m deep across a larger ground area. Lower drilling cost but much larger land take.
Typical horizontal array specifications:
- Trench depth: 1.5–2.5 m
- Spacing between trenches: 1.5 m
- Pipework configuration: straight loop, slinky, or 2-pipe parallel
- Thermal output: roughly 20–30 W per m² of land area
- Land take: approximately 3,000–4,500 m² for a 250 kW system
Horizontal arrays suit sites with abundant land (rural office campuses, school grounds, hospital estates) but rarely work for urban Dublin commercial projects.
Irish geology and drilling productivity
Irish geology varies dramatically across the island, with corresponding effects on drilling productivity and array performance:
- Carboniferous Limestone (most of central Ireland): good thermal conductivity (3.2–3.6 W/m·K), moderate drilling productivity, suitable for vertical arrays
- Old Red Sandstone (south Munster): moderate thermal conductivity, easier drilling
- Granite (Wicklow, Galway uplands): high thermal conductivity (3.6–4.0 W/m·K), slow drilling
- Basalt and Antrim plateau: good thermal conductivity, variable drilling
- Coastal sands and gravels (East coast): poor thermal conductivity, requires deeper boreholes
Geological Survey Ireland (GSI) maintains comprehensive geological mapping and a borehole database that should be consulted before any commercial GSHP design.
Capex breakdown for Irish commercial GSHP
Indicative 2026 installed pricing for a 250 kW commercial GSHP system:
- GSHP equipment (Stiebel Eltron, NIBE, Carrier, Vaillant geoTHERM): €60,000–€95,000
- Vertical borehole drilling (60 × 120 m = 7,200 m at €45/m): €300,000–€450,000
- Header pipework, manifolds, hydraulic separators: €40,000–€65,000
- Building plant room civils: €25,000–€45,000
- Controls and commissioning: €20,000–€30,000
- Design fees and MEP consultancy: €25,000–€45,000
Total installed: €450,000–€750,000 for a 250 kW vertical borehole array system.
For comparison, equivalent capacity air-source would be €150,000–€280,000 — a 200–250% capex premium for GSHP. But operating cost is materially lower over the asset life.
Drilling consents and regulatory framework
Commercial GSHP drilling in Ireland requires:
- Geological Survey Ireland (GSI) registration for all boreholes (free, but mandatory)
- EPA groundwater consent for boreholes deeper than 50 m or where groundwater is encountered
- Local Authority Section 254 consent for plant room civils
- Planning permission typically not required for the array itself (exempted development under Class 8) but required for the GSHP plant building if visible from public road
Total consenting timeline typically 4–8 months for vertical array, 3–6 months for horizontal array.
Notable Irish commercial GSHP projects
- Trinity Business School Dublin: 320 kW vertical borehole array, 48 boreholes × 150 m
- Bartra Healthcare new-build campuses (Cork, Limerick): 250–400 kW GSHP per campus
- Limerick Institute of Technology STEM building: 280 kW horizontal array
- Hayfield Manor Cork: 320 kW garden array for hotel
- DCU Glasnevin Campus heating network: 800 kW phased GSHP array supplying multiple buildings
SCOP performance and operating economics
Irish commercial GSHP installations consistently deliver SCOP 4.5–5.2 in field operation when properly designed. The stable ground source temperature (10–12 °C year-round) means GSHP performance does not degrade in winter the way air-source does.
Worked operating economics for a 250 kW GSHP versus equivalent air-source on a 4,000 m² Dublin office:
- GSHP at SPF 4.6: annual electricity 95,000 kWh @ €0.20 = €19,000/year
- Air-source at SPF 3.4: annual electricity 130,000 kWh @ €0.22 = €28,600/year
- GSHP annual saving vs ASHP: €9,600/year
Over a 25-year asset life with 2% real electricity escalation, GSHP delivers approximately €310,000 of operating cost saving versus ASHP. That covers most of the GSHP capex premium — and GSHP's longer service life (no outdoor unit replacement at year 15) adds another €60,000–€90,000 NPV advantage.
Where GSHP wins decisively
GSHP is the right specification when:
- Annual heating load > 800,000 kWh (large hotels, hospitals, schools, leisure centres)
- Predictable 25-year operating profile (institutional or public sector buildings)
- EXEED funding available — the 30% capex rebate softens the drilling cost premium
- Site has ground availability — rural campuses, hospital estates, school playing fields
- Reversible chilling demand — GSHP delivers exceptional summer chilling COP
- Acoustic constraints — no outdoor mechanical plant
GSHP is the wrong specification when:
- Urban site without ground access — drilling under footprint adds 40–60% cost
- Short asset life expected (< 12 years)
- Tight project timeline — drilling adds 8–12 weeks to construction
- Capex constrained — air-source remains 50–60% cheaper upfront
Outlook for Irish commercial GSHP
The 2024–2026 period saw a modest renaissance of Irish commercial GSHP, driven by:
- Improved Irish commercial drilling capacity (5+ specialist contractors now operating)
- EXEED grant favourability to high-SCOP technologies
- Refrigerant regulation pressure favouring stable, long-life infrastructure
- Corporate ESG and CSRD reporting rewarding 25-year asset solutions
For Irish commercial projects with the right site, scale and timeline characteristics, GSHP remains the highest-performing, longest-lasting heat pump technology available. The capex premium is real but increasingly justified by lifetime economics, especially in EXEED-eligible institutional and public sector deployments.
Get 3 free commercial heat pump quotes — free and no obligation.
Frequently asked questions
How deep do commercial ground source boreholes go in Ireland?
Typically 100–150 m depth in Irish Carboniferous Limestone and Sandstone geology, with up to 200 m possible in challenging ground. Each borehole delivers approximately 4–6 kW thermal capacity, so a 250 kW system typically needs 50–60 boreholes spaced 6–8 m apart in a grid.
How much does a commercial ground source heat pump cost in Ireland?
Indicative 2026 installed pricing: €450,000–€750,000 for a 250 kW vertical borehole array system. Drilling is the dominant cost at €38–€60/m of borehole depth. EXEED grant captures up to 30% of eligible capex, softening the premium versus air-source.
What SCOP does a commercial GSHP deliver in Ireland?
Field SPF of 4.5–5.2 is consistently achievable in well-designed Irish commercial GSHP installations because the ground source temperature stays stable at 10–12 °C year-round. This compares to SPF 3.2–4.0 for air-source — typically 30–40% better seasonal efficiency.
What consents do I need for commercial ground source drilling in Ireland?
GSI borehole registration (mandatory, free), EPA groundwater consent for boreholes > 50 m or where groundwater is encountered, Local Authority Section 254 consent for plant room civils. The array itself is typically exempted development. Total consenting timeline 4–8 months for vertical array.
Sources & further reading
- Geological Survey Ireland Groundwater — GSI
- EPA Groundwater Protection — EPA Ireland
- EXEED Certified Grant — SEAI